Cell-Con | Lead Acid Battery Chargers UL 60601-1

Lead Acid Battery Chargers

Cell-Con provides a safe and effective Lead Acid battery charger solution for charging SLA batteries using a 3 step charge algorithm. In the first phase, the charger will fill the battery to 80-90% capacity. Once at this level, the charger goes into the second phase to fill the remaining 10-20% of capacity until a low level current is detected or a timer expires (depending upon the specific model). The third and final phase reduces the charge current to a safe level where the battery can be left attached to the charger indefinitely.

Unlike traditional ‘taper’ chargers, Cell-Con Lead Acid battery chargers utilize a constant current level in the first mode. When the battery voltage rises to the maximum cycle voltage during charging, the chargers do not immediately change to float mode. Instead, the charger will look for a low level current (current detection) or the expiration of time to terminate constant voltage mode. When the constant voltage mode begins, the battery is already charged to 80-90% of full capacity and can be used at this point if desired. Allowing phase two to conclude ensures that the battery will receive the remaining 10-20% capacity.

Once the low level current is detected, or the timer expires, the constant voltage level of the Lead Acid battery charger is reduced to a safe value (going into float mode) where the battery can be left on indefinitely without risk of overcharge.

CE, UL, Medically approved models
Universal input (90-264VAC / 47-63Hz) for worldwide use
Desktop and wall plug in versions
3 step charge control
6V, 12V, 24V, 36V, and 28V versions available
Current detection or timer charge termination
Protected against reverse polarity and short circuit
Compact, lightweight design
Private labeling available

Battery Chargers Product Overview Video

Battery Chargers Custom Options Video

Product Lineup

Click to See Image	Series # click for details	Wattage	Charge Rate	Capacity Range	Input	6V	12V	24V	36V	48V	Configuration	Dimensions
	452240-S	16W	500mA – 1.3A	1.5Ah – 12Ah	90-264VAC	•	•	•			desktop	3.5” x 1.75” x 1.75”
	452241-S	16W	500mA – 1.3A	1.5Ah – 12Ah	90-264VAC	•	•	•			wall plug in	4” x 1.75” x 1.5”
	452541-S*	35W	1.2A – 2.2A	4.5Ah – 60Ah	90-264VAC		•	•			desktop	4.25” x 2.64” x 1.5”
	452544-S	35W	1.2A – 2.7A	10Ah – 25Ah	10-30VDC	•	•	•			desktop	4.25” x 2.64” x 1.5”
	452040-S	60W	2A – 4A	7Ah – 90Ah	90-264VAC		•	•			desktop	5.25” x 3.15” x 1.75”
	452440-S	60W	2.5A – 4A	20Ah – 200Ah	90-264VAC		•	•			desktop	5.31” x 3.15” x 1.73”
	453240-S	103W	3.5A – 7A	60Ah – 150Ah	110VAC		•	•			desktop	6.25” x 3.25” x 1.75”
	459740-S	120W	2.5A – 10A	40Ah – 400Ah	110VAC		•	•	•	•	desktop	7.25” x 6.75” x 2.5”
	452745-S	300W	10A – 20A	100Ah – 1000Ah	120VAC		•	•			desktop	8.5” x 7.35” x 5.5”
	453540-S	300W	10A – 20A	100Ah – 1000Ah	110 – 120VAC		•	•			desktop	8.27” x 4.45” x 2.09”
	453743-S	16W	560mA – 1.5A	1.5Ah – 15Ah	90 – 264VAC	•	•	•		•	WPI or desktop	4.25” x 2.00” x 1.12”
	453546-S	28W	1A – 2A	4Ah – 60Ah	90 – 264VAC		•	•			WPI or desktop	4.88” x 2.00” x 1.46”

DC/DC input, and IP67 waterproof versions available. *Wall plug in version available upon request